imagepac xtra is specially designed for making business stamps.  It is pre-packaged 50 durometer photopolymer in a sachet with an integrated backing sheet to provide rigidity in the manufacturing and assembly process. imagepac xtra offers all the benefits of sheet polymer without any of the disadvantages of liquid polymer.

Like imagepac it is easier to use, quicker, cleaner and more cost effective than the conventional resin pouring method. It is the fastest method of making a business stamp ever.

No more pouring resin or laying coverfilm, damming tape or backing sheet

just place imagepac xtra...       

imagepac xtra delivers excellent printed image resolution. These are the typical results when exposed on an imagebox 9:

• Screen values at 150 lpi - 3% min & 85% max
• Fine line/reverse line widths - 0.1mm
• Reverse/isolated dot diameter - 0.2mm
• Type size/type size reverse - 3 pt

No mess - No pouring resin, no spills and no need to clean up the exposure unit. No plate assembly time - No more laying film and tape and pouring resin, saving over 10 minutes on average per plate. Less waste - typically provides the user with a reduction of up to 30% in waste resin, damming tape, cover film and backing sheet. Improved inventory control by only carrying only one stock item, instead of four.  Provides quick changeover to different plate thicknesses. No need to wait for other jobs to fill up a negative, just select the correct sachet for the job and run it immediately.

imagepac xtra is available in A2, A3, A4, A5, A6, A7 and A8 sizes. It is available in a variety of plate thicknesses including 2.3mm (90’) and 2.55mm (100’) and clear, red and green colours. imagepac xtra works on all existing types of photopolymer exposure units.